GET Engineering Logo

Ruggedized Conduction Cooled STANAG 4156

759 front I/O
759 rear I/O

GET Engineering is proud to announce the industries only STANAG 4156 PMC Serial Interface Adapter. It is fully compliant to the ANSI/VITA 20‑2001 Conduction Cooled PMC Standard. This interface adapter card offers a full duplex serial data path which can be configured to operate as a Terminal, User or Direct Connection Coupler device. Both STANAG 4156 Type A and B protocols are fully supported. All configuration parameters are accessible through a simple software interface with FPGA‑controlled DMA channels to reduce host CPU overhead.

GET Engineering’s STANAG 4156 card is available in either commercial or extended temperature ranges with the option of front panel (Micro‑D 25 pin) or rear I/O through a PMC P4 connector. The software included with this adapter card provides the user with an operating system independent API enabling easy migration from one operating system to another; for example, from Linux to HPUX.

Key Features

  • Common API across multiple operating systems
  • Memory Mapped Address Space
  • Independent FPGA‑controlled DMA Channels
  • DMA channels reduce CPU overhead
  • Extensive Built‑in‑Test capabilities enable rapid troubleshooting of interface
  • Sample code provided for rapid Application Code Development

Key Hardware Features

  • ANSI/VITA 20‑2001 compliant PMC Module
  • Clock frequency selectable for 1 MHz or 3 Mhz operation
  • Software selectable User, Terminal or Direct Connection Coupler
  • Support for both STANAG 4156 Type A and B protocols
  • Front or Rear Panel (P4) I/O configurations available
  • User controlled Front Panel LEDs for Adapter Status, TX and RX Activity
 Specifications
 STANAG 4156 Interface  Full compliance to STANAG 4156
 Form Factor  ANSI/Vita 20‑2001 Standard Single CCPMC Card Module
 (74 mm x 143.77 mm)
 Bus Interface  IEEE 1386.1‑2002 Standard for common mezzanine card family
 Power Requirements  4.25 Watts (Maximum)
 I/O Connections:
 Front Panel
 Micro‑D‑Subminiature 25‑pin plug (MILSTD‑83513 optional)
 I/O Connections:
 Rear Panel (P4)
 P4 I/O per ANSI/VITA‑35‑2001
 Environmental
 Specifications
 
 Temperature Standard  0°C to 55°C Operating (MILSTD‑810, Method 501 and 502,
 Procedure II)
 Extended Temperature
 Version
 -40°C to 85°C Operating (ANSI/VITA 47, Class CC4)
 Storage Temperature  -40°C to 85°C Operating (MILSTD‑810, Method 501 and 502
 Procedure I)
 Humidity  5% to 95% humidity operational (non‑condensing)
 (MILSTD‑810, Method 507)
 Vibration  0.01g²/Hz 15–2KHz, Optional 0.1g²/Hz 15–2KHz (MILSTD‑810,
 Method 514, Procedure I)
 Operating Shock  20 g peak, Optional 40 g peak (MILSTD‑810, Method 516, Procedure I)
 Mean Time Between
 Failures
 Greater than 200K hours MTBF per MILHDBK‑217, Revision E,
 25°C Ground Benign Environment
Adapter Assemblies

Adapter Assemblies

Rugged engineering brings you reliability like no other

Learn More

NTDS Over Ethernet Systems

NTDS Over Ethernet Systems

The ability to adapt to any situation at anytime

Learn More

Fiber Optic solutions

Fiber Optic solutions

"Out of range" needn’t be in your vocabulary

Learn More

Tactical Data Processors

Tactical Data Processors

Easy connectivity enables legacy system modernization

Learn More

Cables and Connectors

Cables and Connectors

Light weight, adaptable connections for NTDS

Learn More